My Iphone Screen Went Black but Phone Is Still on

iPhones are synonymous with premium build quality and fluid performance. They are known as some of the best smartphones that money can buy and are trusted by a lot of people worldwide. However, just like any other smartphone, iPhones have their flaws. One of the most common issues that users face is their iPhone display not working or their iPhone screen is blue and not responding to any touches. If you are also facing the blue screen of death issue with your iPhone, then this article will be helpful in troubleshooting the same.

Why is the iPhone stuck on the black screen of death?

Wondering why this happened? Well, it could have been caused by more than one factor. For example, it could be due to system failure, problematic/outdated apps, or water/physical damage.

A stubborn software (in rare cases) can also cause trouble. So, we will have to look into all these reasons while fixing the issue.

Get Repair Today

Hard reset/Force restart your iPhone

Hard reset is what comes to the mind when you want to sort out common issues. It would be wise to give it a shot.

On iPhone 8 or later

  • Press the volume up button. Then, quickly press the volume down button. Then, hold down the side button until the Apple logo appears on the screen.

On iPhone 7 and 7 Plus

  • Hold down the volume down button and the sleep/wake button at once until the Apple logo shows up.

On iPhone 6s or earlier

  • Press and hold both the sleep/wake button and the home button until the Apple logo appears on the screen.

Read – How to Check Hardware Issues on iPhone Using Panic.ips

If the black screen is gone after the hard reset, you have successfully fixed the problem. Note:

  • To prevent the black screen from occurring on your iOS device again, try updating the software on your iPhone. Head into Settings > General > Software Update.

software update

  • Besides, remove all the redundant files including photos, videos, and music that have hogged plenty of storage on your device. Also, uninstall the unnecessary apps, and update apps so that they can run smoothly.

Connect the iPhone to Power Source

At times, the black screen issue could occur due to a deep discharged battery. A simple solution to fix this issue is to just connect the iPhone to the charger and leave the device for around an hour or so.

If your iPhone turns on, the problem is gone. But if it doesn't turn on, move on to the recovery mode.

Crashed App

The iPhone blank screen issue can also occur right after you open a faulty or buggy app. The app might be causing the blank screen to occur on your device. To fix this, you need to press the 'Home' button twice, access the recent apps window, and close the app causing the iPhone display issue. If the screen is fixed, then you should uninstall that specific app so that it doesn't occur again.

Get Repair Today

Restore iPhone in Recovery Mode

Recovery Mode is a radical solution designed to resolve adamant issues like this one. So, if a hard reset isn't working, try it out. Bear in mind that it will wipe out all the existing data on your device.

  1. To get started, connect your device to a Mac or Windows PC.
  2. Now, put your iOS device into recovery mode by following these quick steps.

Read – 8 Critical iPhone and iPad Security Features

On Your iPhone 8, iPhone 8 Plus, iPhone SE 2, iPhone X, iPhone XS, iPhone XR, iPhone 11, iPhone 11 Pro, or iPhone 11 Pro Max

Press and release the volume up button. Then, quickly do the same with the volume down button. You then need to keep holding the Side button until the recovery mode screen shows up.

On your iPhone 7 or 7 Plus

Press and hold both the sleep/wake button and the volume down button simultaneously. Keep holding the buttons until the recovery mode screen appears on the screen.

On your iPhone 6s or earlier

You need to press and hold the home button and on/off button at once. Be sure to hold down both these buttons until your iPhone has entered recovery mode.

  1. Next, iTunes will show a prompt asking you to update or restore your device.

Update and restore iPhone

(Image credit: Apple Support)

Select Update to update your iOS device to the latest iOS version. Choose Restore to erase your iPhone and then install the latest version of iOS.

Perform a DFU Restore

Performing a Device Firmware Upgrade is considered as the last step after performing the recovery mode restore step. This is the deepest type of system restore and should only be performed if you haven't fixed the iPhone display problem and have no issues with losing the data stored on your iPhone. DFU is used for fatal system errors and if done on a physically damaged device, can render it useless or dysfunctional. Here are the steps to do a DFU restore on your iPhone:

  1. Try to close all the apps currently running on your device to make sure that the DFU restore process isn't interrupted.
  2. Connect the iPhone to a Mac or system using the USB cable.
  3. Press and hold the Power button for 3 seconds while the device is connected.
  4. While holding the Power button, press the Volume Down button for 10 seconds as well. Make sure that the Apple logo doesn't appear while you are holding the buttons. If it does, start the process all over again.
  5. If the Apple logo doesn't come up, release the Power button only. The Volume Down button needs to be pressed for another 5 seconds.
  6. You'll enter the DFU restore mode if the screen stays black. Your computer will prompt an alert that iTunes has detected your iPhone and then you can follow the instructions given on the screen to complete the process.
  7. If the 'Plug into iTunes' screen appears, restart the process again.

Contact iPhone Repair Centre

So, these are some of the best ways to fix your iPhone display problem on your own. If none of these solutions work for your iPhone black screen problem, there is a good chance that the issue is related to hardware. If that is the case, you should contact a trusted iPhone repair centre like Rapid Repair and get your iPhone display not working issue fixed. Their tech professionals are experts in working with black or blue screen on iPhones and will fix them affordably. Contact them at the earliest to get your iPhone blue screen fixed.

Get Repair Today

Read Also – 7 Neat Tricks to Fix iTunes Sync Error 54

My Iphone Screen Went Black but Phone Is Still on

Source: https://rapidrepair.in/blog/iphone-display-issues/

0 Response to "My Iphone Screen Went Black but Phone Is Still on"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel